Menu
OpenVPN is a Virtual Private Networking (VPN) solution provided in the Ubuntu Repositories. It is flexible, reliable and secure. It belongs to the family of SSL/TLS VPN stacks (different from IPSec VPNs). This chapter will cover installing and configuring OpenVPN to create a VPN.
- Openvpn Password Auth
- Openvpn Create Tls-auth Key
- Generate Tls-auth Key Openvpn Download
- Openvpn Tls Server
Instead of storing private keys on regular storage, it's a lot better to use a security device like a token or smartcard. Private keys on such devices will never leave it and cryptographic operations are performed on the card itself. This minimizes the risk in a private key compromise significantly. OpenVPN can talk to PKCS#11 compatible devices. If you do not have a ta.key, of course tls-auth will fail. You may: drop the tls-auth instruction altogether. This is not a major dent in your security: the Manual in fact states: This feature by itself does not improve the TLS auth in any way, although it offers a 2nd line of defense if a future flaw is discovered in a particular TLS cipher-suite or implementation (such as CVE-2014-0160. Type the command to generate the pre-shared key (PSK). This key is used by both the server and the clients to sign packets using this PSK. It constitutes an added layer of protection to the TLS channel. Openvpn -genkey -secret ta.key. Generate Diffie Hellman parameters (This is necessary to set up the encryption) build-dh Generate a shared-secret key (Required when using tls-auth) 'C: Program Files OpenVPN bin openvpn.exe' -genkey -secret 'C: Program Files OpenVPN easy-rsa keys ta.key' Configuration Files. The sample configuration files can be easily found using the start. DH and use prepare for tls-auth. Generate Diffie-Hellman parameters using./build-dh Per hardening tips, use tls-auth. For that, generate the shared-secret key using: openvpn -genkey -secret ta.key The resulting file (ta.key) must be distributed to clients as well, but you should not put it in public. Create certificates for clients.
If you want more than just pre-shared keys OpenVPN makes it easy to setup and use a Public Key Infrastructure (PKI) to use SSL/TLS certificates for authentication and key exchange between the VPN server and clients. OpenVPN can be used in a routed or bridged VPN mode and can be configured to use either UDP or TCP. The port number can be configured as well, but port 1194 is the official one. And it is only using that single port for all communication. VPN client implementations are available for almost anything including all Linux distributions, OS X, Windows and OpenWRT based WLAN routers.
Server Installation
To install openvpn in a terminal enter:
Public Key Infrastructure Setup
The first step in building an OpenVPN configuration is to establish a PKI (public key infrastructure). The PKI consists of:
- a separate certificate (also known as a public key) and private key for the server and each client, and Windows 8 product key generator kickass.
- a master Certificate Authority (CA) certificate and key which is used to sign each of the server and client certificates.
OpenVPN supports bidirectional authentication based on certificates, meaning that the client must authenticate the server certificate and the server must authenticate the client certificate before mutual trust is established.
Both server and client will authenticate the other by first verifying that the presented certificate was signed by the master certificate authority (CA), and then by testing information in the now-authenticated certificate header, such as the certificate common name or certificate type (client or server).
Certificate Authority Setup
To setup your own Certificate Authority (CA) and generating certificates and keys for an OpenVPN server and multiple clients first copy the
easy-rsa
directory to /etc/openvpn
. This will ensure that any changes to the scripts will not be lost when the package is updated. From a terminal change to user root and:Java generate 128 bit key. Note: If you want you can - instead of doing so interactively - edit
/etc/openvpn/easy-rsa/vars
adjusting it to your needs.Change to the newly created directory
/etc/openvpn/easy-rsa
and run:Server Keys and Certificates
Next, we will generate a key pair for the server:
Diffie Hellman parameters must be generated for the OpenVPN server. The following will place them in
pki/dh.pem
.And finally a certificate for the server:
All certificates and keys have been generated in subdirectories. Common practice is to copy them to /etc/openvpn/:
Client Certificates
The VPN client will also need a certificate to authenticate itself to the server. Usually you create a different certificate for each client.
This can either be done on the server (as the keys and certificates above) and then securely distributed to the client. Or vice versa the client can generate and submit a request that is sent and signed by the server.
Mac app cross browser testing tool. To create the certificate, enter the following in a terminal while being user root:
View title below icon in mac books app. If the first command above was done on a remote system get the .req file to the CA server. There you can then import it via
easyrsa import-req /incoming/myclient1.req myclient1
. Then you can go on with the second sign-eq
command.In both cases, afterwards copy the following files to the client using a secure method:
pki/ca.crt
pki/issued/myclient1.crt
As the client certificates and keys are only required on the client machine, you can remove them from the server.
Simple Server Configuration
Along with your OpenVPN installation you got these sample config files (and many more if you check):
Start with copying and unpacking server.conf.gz to /etc/openvpn/server.conf.
Edit
/etc/openvpn/myserver.conf
to make sure the following lines are pointing to the certificates and keys you created in the section above.Complete this set with a ta key in
etc/openvpn
for tls-auth like:Edit
/etc/sysctl.conf
and uncomment the following line to enable IP forwarding.Then reload sysctl.
That is the minimum you have to configure to get a working OpenVPN server. You can use all the default settings in the sample server.conf file. Now start the server.
Be aware that the “systemctl start openvpn” is not starting your openvpn you just defined.
Openvpn uses templatized systemd jobs, openvpn@CONFIGFILENAME. So if for example your configuration file is
Openvpn uses templatized systemd jobs, openvpn@CONFIGFILENAME. So if for example your configuration file is
myserver.conf
your service is called openvpn@myserver. You can run all kind of service and systemctl commands like start/stop/enable/disable/preset against a templatized service like openvpn@server.You will find logging and error messages in your via journal.
If you started a templatized service openvpn@server you can filter for this particular message source with:
If you started a templatized service openvpn@server you can filter for this particular message source with:
The same templatized approach works for all of systemctl:
You can enable/disable various openvpn services on one system, but you could also let Ubuntu it for you. There is config for
After “systemctl daemon-reload” a restart of the “generic” openvpn will restart all dependent services that the generator in /lib/systemd/system-generators/openvpn-generator created for your conf files when you called daemon-reload.
AUTOSTART
in /etc/default/openvpn
. Allowed values are “all”, “none” or space separated list of names of the VPNs. If empty, “all” is assumed. The VPN name refers to the VPN configutation file name. i.e. home
would be /etc/openvpn/home.conf
If you’re running systemd, changing this variable will require running systemctl daemon-reload
followed by a restart of the openvpn service (if you removed entries you may have to stop those manually).After “systemctl daemon-reload” a restart of the “generic” openvpn will restart all dependent services that the generator in /lib/systemd/system-generators/openvpn-generator created for your conf files when you called daemon-reload.
Now check if OpenVPN created a tun0 interface:
Simple Client Configuration
There are various different OpenVPN client implementations with and without GUIs. You can read more about clients in a later section on VPN Clients. For now we use commandling/service based OpenVPN client for Ubuntu which is part of the very same package as the server. So you have to install the
openvpn
package again on the client machine:This time copy the client.conf sample config file to /etc/openvpn/.
Copy the following client keys and certificate files you created in the section above to e.g. /etc/openvpn/ and edit
/etc/openvpn/client.conf
to make sure the following lines are pointing to those files. If you have the files in /etc/openvpn/ you can omit the path.And you have to specify the OpenVPN server name or address. Make sure the keyword client is in the config. That’s what enables client mode.
Now start the OpenVPN client with the same templatized mechanism:
You can check status as you did on the server:
On the server log an incoming connection looks like the following.
You can see client name and source address as well as success/failure messages.
You can see client name and source address as well as success/failure messages.
And you can check on the client if it created a tun0 interface:
Check if you can ping the OpenVPN server:
The OpenVPN server always uses the first usable IP address in the client network and only that IP is pingable. E.g. if you configured a /24 for the client network mask, the .1 address will be used. The P-t-P address you see in the ifconfig output above is usually not answering ping requests.
Check out your routes:
First trouble shooting
Openvpn Password Auth
If the above didn’t work for you, check this:
- Check your
journal -xe
- Check that you have specified the keyfile names correctly in client and server conf files
- Can the client connect to the server machine? Maybe a firewall is blocking access? Check journal on server.
- Client and server must use same protocol and port, e.g. UDP port 1194, see port and proto config option
- Client and server must use same config regarding compression, see comp-lzo config option
- Client and server must use same config regarding bridged vs routed mode, see server vs server-bridge config option
Advanced configuration
Advanced routed VPN configuration on server
The above is a very simple working VPN. The client can access services on the VPN server machine through an encrypted tunnel. If you want to reach more servers or anything in other networks, push some routes to the clients. E.g. if your company’s network can be summarized to the network 192.168.0.0/16, you could push this route to the clients. But you will also have to change the routing for the way back - your servers need to know a route to the VPN client-network.
Openvpn Create Tls-auth Key
The example config files that we have been using in this guide are full of all these advanced options in the form of a comment and a disabled configuration line as an example.
Axure rp pro 6.5.0.3051. Please read the OpenVPN hardening security guide for further security advice.
Advanced bridged VPN configuration on server
OpenVPN can be setup for either a routed or a bridged VPN mode. Sometimes this is also referred to as OSI layer-2 versus layer-3 VPN. In a bridged VPN all layer-2 frames - e.g. all ethernet frames - are sent to the VPN partners and in a routed VPN only layer-3 packets are sent to VPN partners. In bridged mode all traffic including traffic which was traditionally LAN-local like local network broadcasts, DHCP requests, ARP requests etc. are sent to VPN partners whereas in routed mode this would be filtered.
Generate Tls-auth Key Openvpn Download
Prepare interface config for bridging on server
First, use netplan to configure a bridge device using the desired ethernet device.
Static IP addressing is highly suggested. DHCP addressing can also work, but you will still have to encode a static address in the OpenVPN configuration file.
The next step on the server is to configure the ethernet device for promiscuous mode on boot. To do this, ensure the networkd-dispatcher package is installed and create the following configuration script.
Then add the following contents.
Prepare server config for bridging
Edit
/etc/openvpn/server.conf
to use tap rather than tun and set the server to use the server-bridge directive:After configuring the server, restart openvpn by entering:
Prepare client config for bridging
The only difference on the client side for bridged mode to what was outlined above is that you need to edit
/etc/openvpn/client.conf
and set tap
mode:Finally, restart openvpn:
Openvpn Tls Server
You should now be able to connect to the full remote LAN through the VPN.
References
- Snap’ed version of openvpn easy-openvpn
- Debians OpenVPN Guide